3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver • EUR 1.247,63 (2025)

  1. Graveurausstattung
  2. 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

Siehe Details auf eBayerhältlich bei

EUR 1.247,63 Sofort-Kaufen, Kostenloser Versand, 30-Tag Rücknahmen, eBay-Käuferschutz

Verkäufer: basedaak222 ✉️ (913) 98.9%, Artikelstandort: Leipzig, DE, Versand nach: EUROPE, Artikelnummer: 405466512089 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver. Process aluminum alloy and hard wood. Item Specifications. suitable for PCB,wood,Plexiglass,PVC,Crystal Acrylic,RESIN,Plastic,SEALS, MDF,COMPOSITE,Aluminum material,Copper.Not suitableIron. SKU:TS3040 +TS30402 +TS001-B. 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver Description MODELL ONE: 1500W CNC 6040 4 Achse USB PORT AND PARALLEL PORT SKU: 4 AXIS -1.5KW-6040USB-DE 1500W-6040T1+1500W-6040T3+1500W-6040T4+1500W-TS002 Notes:Please prepare a computer with USB Interface. Attention(Parallel port): This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. Packing list: 1X main unit (Frame) 1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 1X USB line 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*24mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable Description 1.This CNC 6040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. 4.The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner... 5.With the assist of the CNC ROUTER 6040T, your design idea will be real-time display. cnc engraving machine parameters: X,Y,Z Working Area:600(Y)*390(X)*120(Z)mm Outside dimension:865*680*570mm(L*W*H) Table size:770(Y)*490(X)mm Lathe structure:6061/6063 Aluminium alloy Max. Feeding height:≤100mm Drive unit: X axis:1605 Ball Screws Y axis:1605 Ball Screws Z axis:1204 Ball Screws Sliding unit: X axis:High intensity Chromeplate shaft Y axis:High intensity Chromeplate shaft Z axis:High intensity Chromeplate shaft Stepping motor:57 two-phase 3A 150N.cm Spindle motor (tips:1,The spindle motor must connect with the VFD. 2,It cannot directly connect with the supply voltage (AC110V). 3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Outside dimension:65*158mm Material:304 stainless steel,Copper coil,Pressure cast aluminum pipe water jacket VOLTS,current,power:AC220 /50Hz,5A,1.5KW VFD Spindle speed:24000 rpm Max working frequency:400Hz Principal axis collet:ER11collet,Standard configuration :6mm Nut Model:ER11-A Cooling:Water-cooling Speed mode:By adjusting the VFD output voltage and operating frequency:from 0-24000RPM Lubrication way:lubricated by high grease Repeat accuracy:0.05mm Spindle precision:radial beat acuities 0.03mm Carving Instructions:G code / TAB files / nc file / NCC files Communication interface:through parallel connection with computer Software environment:windows XP / win7 Maximum speed:0-4000mm/min Carving speed:0-2500mm/min(different materials differ Installation tips: The software perform better on the 32bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important) Otherwise, the antivirus will regards the cnc software is virus and stop the installation. PS: Please don't update the software when installed, then it will not need the license Numbers. Control box parameters: Operating Voltage:AC220V Control unit:Toroidal transformer + PWM power supply module + TB6560 stepping motor drive Computer connection:USB port OR PARALLEP port Command code:G code Acceptable software:EMC2 Protection:Emergency stop button Feature: 1,The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used to process aluminum alloy and hard wood. 2,water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle. 4, Software Compatability:Emc2/Type3/ArtCAMParameter How to USE 1.Assembling and locating the CNC machine on steady desk well. 2.Make sure that your computer has a 25pin USB port output. 3. Place the contral box in a ventilated dry place where there is no dust,no moisture 4.Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. 5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller. 6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. 7.Installing a CNC control software and Drive such as the EMC2on your computer. 8.Fllowing our manual or guideline to set uo the software. 9. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. 10.You can enjoy making you dream with using our CNC machine now. MODEL TWO: 1500W CNC 6040 3 Achse USB port SKU:3AIX6040USB-1+3AIX6040USB-3+3AIX6040USB-4+TS007USB Attention: It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the usb port driver. Notes:Please prepare a computer with USB Interface. Description: Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper, 1. This CNC 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2. It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate,PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. 4. The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner... 5. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display. cnc engraving machine parameters: X, Y, Z Working Area: 600(Y)*390(X)*120(Z)mm Outside dimension: 865*680*570mm(L*W*H) Table size: 770(Y)*490(X)mm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1605 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm Spindle motor: (tips:1. The spindle motor must connect with the VFD. 2. It cannot directly connect with the supply voltage (AC220V). 3. Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor.) Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC220 /50Hz, 5A, 1.5KW VFD Spindle speed: 24000 rpm Max working frequency: 60Hz Principal axis collet: ER11collet,Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Software environment: Windows XP/Win7 Maximum speed: 0-4000mm/min Carving speed: 0-2500mm/min(different materials differ) installation tips: The software perform better on the 32bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOADING AND installing the software.(This is very important) Otherwise, the antivirus will regard the cnc software as virus and stop the installation. PS:Please don't update the software when installed, then it will not need the license Numbers. Control box parameters: Operating Voltage: AC220V Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive Computer connection: USB port Command code: G code Acceptable software: EMC2 Protection: Emergency stop button Feature: 1. The NEW 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used toprocess aluminum alloy and hard wood. 2. water cooling spindle works more stable and durable. 3. High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle. 4. Software Compatability:Emc2/Type3/ArtCAMParameter How to use: 1. Assembling and locating the CNC machine on steady desk well. 2. Make sure that your computer has a USB port output. 3. Place the contral box in a ventilated dry place where there is no dust, no moisture 4. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. 5. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller. 6. Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. 7. Installing a CNC control software and Drive such as the EMC2on your computer. 8. Fllowing our manual or guideline to set uo the software. 9. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine. 10.You can enjoy making you dream with using our CNC machine now. MODEL THREE:800W CNC 3040 4 Achse PARALLEL PORT SKU:TS3040 +TS30402 +TS001-B Attention This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. Notes:Please prepare a computer with DB25 parallel Interface . Package Content 1X main unit (Frame) 1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 1X 25pin Parallel lines 2X cutter 2*6mm 2X cutter 3*6mm 10X 4*7mm round head 6X 4*10mm black Inner six angle screw with nut 8X 5*20mm black Inner six angle screw 4X 5*8mm Flat Philip's head screw with nut and gasket 8X 6*11mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual 2X CD Attention: This machine needs to be connected to a computer through its controller box with a parallel cable (both included). It is not recommended to connect it to a notebook through a parallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect it to computers with 64 bit versions of Windows due to problems with the parallel port driver. Tupianku Image Hosting Service Description 1.This CNC 3040T machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. 4.The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner... 5.With the assist of the CNC ROUTER 3040T, your design idea will be real-time display. CNC ENGRAVING MACHINE parameters: X,Y,Z Working Area:400(Y)*295(X)*80(Z)mm Outside dimension:630*505*495mm(L*W*H) Table size:550(Y)*360(X)mm Lathe structure:6061/6063 Aluminium alloy Max. Feeding height:≤60mm Drive unit: X axis:SFUO1204-4 Ball Screws Y axis:SFUO1204-4 Ball Screws Z axis:SFUO1204-4 Ball Screws Sliding unit X axis:High intensity Chromeplate shaft Y axis:High intensity Chromeplate shaft Z axis:High intensity Chromeplate shaft Stepping motor:57 two-phase 3A 150N.cm Spindle motor (tips:1,The spindle motor must connect with the VFD. 2,It cannot directly connect with the supply voltage (AC110V/220V).3,Please don’t change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Outside dimension:65*158mm Material:304 stainless steel,Copper coil ,Pressure cast aluminum pipe water jacket VOLTS,current,power:AC220V/50Hz,5A,0.8KW VFD Spindle speed:24000 rpm Max working frequency:400Hz Principal axis collet:ER11collet,Standard configuration :6mm Nut Model:ER11-A Cooling:Water-cooling Speed mode:By adjusting the VFD output voltage and operating frequency from 0-24000RPM Lubrication way:lubricated by high grease Repeat accuracy:0.05mm Spindle precision :radial beat acuities 0.03mm Carving Instructions:G code / TAB files / nc file / NCC files Communication interface:through parallel connection with computer Software environment:windows XP / win7 Maximum speed:0-4000mm/min Carving speed:0-2500mm/min(different materials differ) intsalation tips: The software perferm better on the 32bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important) Otherwise, the antivirus will regards the cnc software is virus and stop the installation. PS: Please don't update the software when installed, then it will not need the license Numbers. Control box parameters: Operating Voltage:AC220V~240V Control unit:Toroidal transformer + PWM power supply module + TB6560 stepping motor drive Computer connection:Parallel port Command code:G code Protection:Emergency stop button Feature: 1,The NEW 0.8KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used to process aluminum alloy and hard wood. 2,water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision.Anti-blackflash,high precision,long life circle. 4, Software Compatability:Type3/ArtCAMParameter How to use 1.Assembling and locating the CNC machine on steady desk well. 2.Make sure that your computer has a 25pin parallel port output. 3. Place the contral box in a ventilated dry place where there is no dust,no moisture 4.Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. 5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller. 6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. 7.Installing a CNC control software and Drive such as the on your computer. 8.Fllowing our manual or guideline to set uo the software. 9. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. 10.You can enjoy making you dream with using our CNC machine now. MODEL FOUR :800W CNC 3020 4 Achse USB AND PARALLEL PORT sku:4AIX3020T-USB+TS001USB sku:4AIX3020T +TS001-B Notes:Please prepare a computer with USB Interface. Attention(Parallel port): This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. Description: 1.This CNC 3020 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. 2.It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. and soft metal .like aluminum, copper and silver to engrave them into 3D/2D works etc. 3.It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin double color plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc. 4.The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner... 5.With the assist of the CNC ROUTER 3020, your design idea will be real-time display.Lathe structure 6061/6063 Aluminium alloy CNC ENGRAVING MACHINE PARAMETERS: X,Y,Z Working Area: 300(Y)*175(X)*70(Z)mm Outside dimension: 510*390*445mm(L*W*H) Table size: 435(Y)*240(X)mm Lathe structure: 6061/6063 Aluminium alloy Max. Feeding height ≤50mm Drive unit X axis SFU01204-4 Ball Screws Y axis SFU01204-4 Ball Screws Z axis SFU01204-4 Ball Screws Sliding unit X axis High intensity Chromeplate shaft Y axis High intensity Chromeplate shaft Z axis High intensity Chromeplate shaft Stepping motor 57 two-phase 3A 150N.cm Spindle motor Tips: 1,The spindle motor must connect with the VFD. 2,It cannot directly connect with the supply voltage (AC110V/220V). 3,Please don't change the data setting of the VFD if you are not professional technicians,otherwise it might damage the spindle motor. Outside dimension: 65*158mm Material: 304 stainless steel,Copper coil, Pressure cast aluminum pipe water jacket VOLTS,current,power: AC220V/50Hz,5A,800W VFD Spindle speed: 24000 rpm Max working frequency 400Hz Principal axis collet: ER11collet,Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Software environment: windows XP / win7 32bite system Maximum speed: 0-4000mm/min Carving speed: 0-2500mm/min(different materials differ) Installation tips: The software perform better on the 32bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important) Otherwise, the antivirus will regards the cnc software is virus and stop the installation. PS: Please don't update the software when installed, then it will not need the license Numbers. Control box parameters: Operating Voltage: AC220V Control unit Toroidal transformer + PWM power supply module + TB6560 stepping motor drive Computer connection: USB PORT OR PARALLEL PORT Command code: G code Protection: Emergency stop button Feature: 1,The NEW 0.8KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can be used to process aluminum alloy and hard wood. 2,water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more precision. Anti-blackflash,high precision,long life circle. 4, Software Compatability:Type3/ArtCAMParameter How to USE 1.Assembling and locating the CNC machine on steady desk well. 2.Make sure that your computer has functional USB port output. 3. Place the contral box in a ventilated dry place where there is no dust,no moisture 4.Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. 5.Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X,Y,Z,A).Otherwise, It will damage the driver of the controller. 6.Correctly instal the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. 7.Installing a CNC control software and Drive such as the on your computer. 8.Fllowing our manual or guideline to set up the software. 9. Before turn on the machine, please check all the cable and water-cooling system to make sure they are working fine. 10.You can enjoy making you dream come true with using our CNC machine now. MODEL FIVE:560W CNC 3040 4 Achse Parallel Port SKU:PO3040T1+PO3040T2+TS003 Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. Description suitable for PCB,wood,Plexiglass,PVC,Crystal Acrylic,RESIN,Plastic,SEALS, MDF,COMPOSITE,Aluminum material,Copper.Not suitableIron. Item Specifications CNC ENGRAVING MACHINE parameters: X,Y,Z Working Area:400(Y)*295(X)*80(Z)mm Outside dimension:630*505*495mm(L*W*H) Table size:550(Y)*360(X)mm Lathe structure:6061/6063 Aluminium alloy Max. Feeding height:≤60mm Drive unit X axis:SFU01204-4 Ball Screws Y axis:SFU01204-4 Ball Screws Z axis:SFU01204-4 Ball Screws Sliding unit X axis:High intensity Chromeplate shaft Y axis:High intensity Chromeplate shaft Z axis:High intensity Chromeplate shaft Stepping motor:57 two-phase 3A 150N.cm Spindle motor Outside dimension:65*158mm Material:304 stainless steel,Copper coil ,Pressure cast aluminum pipe water jacket VOLTS,current,power:220V/50Hz,5A,560W VFD Spindle speed:25000 rpm Max working frequency:400Hz Principal axis collet adopts drill chuck: fit 2mm-6mm burs Speed mode:By adjusting the VFD output voltage and operating frequency from 0-25000RPM Lubrication way:lubricated by high grease Repeat accuracy:0.05mm Spindle precision :radial beat acuities 0.03mm Carving Instructions:G code / TAB files / nc file / NCC files Communication interface:through parallel connection with computer Software environment:windows XP / win7 Maximum speed:0-4000mm/min Carving speed:0-2500mm/min(different materials differ) installation tips: The software perform better on the 32bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important) Otherwise, the antivirus will regard the cnc software as virus and stop the installation. PS: Please don't update the software when installed and it will not need the license Numbers. Package Content 1× Engraving machine 1× 4th Rotation axis 1 set× Accessories of 4th Rotation axis(5 parts) 1× Control box 1× Rotation spindle motor 1× Connecting wire 1× Parallel cable 1× Power line 2× Engraving knives 2× Carbon brush 2 sets× Clamp tools 1× User's guide 1× Software MODEL SIX:400W CNC 3040 4 Achse USB and Parallel Port Attention(USB PORT) : Notes:Please prepare a computer with USB Interface. Attention(Parallel port): This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. LL3040T1-USB+LL3040T2-USB LL3040T1+LL3040T2 Introduction CNC 3040 is suitble for Industry,Technology Research,Advertising Design,Arts Creation,Teaching, Student Project and Hobby Purposes. CNC3040 is a desktop CNC machine and designd for processing Industrial or Hobby Prototype Building, Building Model Making,PCB, Adverstising Signs,Artwork,Crafts,Aircraft Models,RC Model parts,etc.So,you can do engraving work at office or home. Exquisite 3040 is a miniature version of mobile longmen structure of carving machine,put on you computer is like puting a printer or scanner that coordination,and can completely as a compute peripherals tools,anywhere,anytime,help you to design intent fast real appear.Nonmetal materials on the milling,and it can also be used to carving simple PCB/CNC. Application This 3040 engraer is a user-friendly desktop engraving machine for those with limited space and /or a limited budget. The Computerized CNC Engraving and Cutting Machine is suitable for various materials, such as WOOD, PMMA or other plastic, MDF board,native wood,PVC,Acrylic, wood,composite board plywood,It can be used widely to process or make adverstising signs,PCB, nameplates,badges,seals,bronzing plate,aluminium alloy,acryplates,ABS resin double color plate, PVC foaming board,indentation plates,signs, construction models,instrument panels,wooden products,etc. Technical Parameters Effective working travel 275(X)mm*385(Y)mm*60(Z)mm dimension 610x480*400mm Max.workpiece dimension 70mm Work table dimension 320mm*530mm Frame materials aluminum alloy 6063 and 6061 Leadscrew 1404 double thread Trapezoidal screws Driving units X axis 1404 trapezoidal screws Y axis 1404 trapezoidal screws Z axis 1404 trapezoidal screws Sliding units X axis Dia.16mm chrome plate shafts Y axis Dia.16mm chrome plate shafts Z axis Dia.12mm chrome plate shafts Stepping motor type 57 two-phase 1.8A Spindle motor 400w dc motor 500~8000PRM/Min Principal axis collet ER11 / 3.175 mm Repeat accuracy 0.05mm Spindle precision radial beat acuities 0.03 mm Control unit triaxial one-piece drive + ring variable power + PWM speed Carving Instructions G-code/.tab /.nc / .ncc/.txt Communication interface through USB port connection with computer Software environment windows XP / win7 Maximum speed 0-4000mm/min Carving speed 300-2500mm/min (different materials differ) Machine weight 28KG Instalation tips: The software perferm better on the 32bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important) Otherwise, the antivirus will regards the cnc software is virus and stop the installation. PS: Please don't update the software when installed, then it will not need the license Numbers. Control box parameters: Operating Voltage:AC220V Control unit:2.5A stepping motor driver plus adjustable spindle speed controller Computer connection:on board palrallel port/ USB Command code:G code Acceptable software:EMC2 Protection:Emergency stop button Feature Simple operation and installation More steady and strong equiped with aluminum alloy frame materials Can be controlled by computer Can control the engraving more precise Emergency stop button enhance security Large 3D engraving in soft wood,MDF board,native wood,PVC,Acrylic we suggest use one or two spiral flute ball bits. Can engraving much more materails by spiral flute bits,such as metal,steel,MDF board, solid wood,composite board plywood,stone Spindle motor knob is useful for small positioning adjustment ,with steady and strong support structure. Cover plates reducing pollution for the screws and shafts. The reinforced and thickened machine body make transportation absolutely to be safer and longer life time. The chrome shafts is not easy to deform,suitable for long time use. Flexible coupling can be used for high torque transmission. High Precision Stepping motor makes engraving more precise . How to use Please see the English user manual to see how to set up the software and how to use this machine. 1.Assembling and locating the CNC machine on steady desk well. 2.Make sure that your computer has a on-board USB port output. 3.Installing a CNC control software and Drive such as the EMC2 on your computer. 4.Connecting the control box with the CNC machine and you computer. 5.Following our manual or guideline to set uo the software. 6.You can enjoy making you dream with using our CNC machine now. MODEL SEVEN:400w CNC 3040 3 Achse USB and Parallel Port Updated New CNC 3040T Router Engraver/Engraving Drilling and Milling Machine Attention(Parallel port): This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. More Precise Stepping Motor The engraving process is visible as controlled by computer Simple operation and installation Engrave almost anything on almost any surface X、Y、Z axis carving make more precise and and three-dimensional effect Cover plates reducing pollution for the screws and shafts. More steady and strong equiped with aluminum alloy frame materials Reinforced and thickened machine body make transportation absolutely to be safer and longer life time EXPRESS MAIL SHIPPING SERVICE with TRACKING NUMBER Introduction CNC3040 is suitble for Industry,Technology Research,Advertising Design,Arts Creation,Teaching,Student Project and Hobby Purposes. CNC3040 is a desktop CNC machine and designd for processing Industrial or Hobby Prototype Building, Building Model Making,PCB,Adverstising Signs,Artwork,Crafts,Aircraft Models,RC Model parts,etc.So,you can do engraving work at office or home. Exquisite 3040 is a miniature version of mobile longmen structure of carving machine,put on you computer is like puting a printer or scanner that coordination,and can completely as a compute peripherals tools,anywhere,anytime,help you to design intent fast real appear.Nonmetal materials on the milling,and it can also be used to carving simple PCB/CNC. Application This 3040 engraer is a user-friendly desktop engraving machine for those with limited space and /or a limited budget. The Computerized CNC Engraving and Cutting Machine is suitable for various materials, such as WOOD, PMMA or other plastic,MDF board,native wood,PVC,Acrylic, wood,composite board plywood,It can be used widely to process or make adverstising signs,PCB,nameplates,badges,seals,bronzing plate,aluminium alloy,acryplates,ABS resin double color plate,PVC foaming board,indentation plates,signs,construction models,instrument panels,wooden products,etc Technical Parameters 3040T triaxial engraving machine part parameters: 3040T triaxial engraving machine part parameters: Effective working travel :275(X)mm*385(Y)mm*60(Z)mm Shape dimension :610x480*400mm Max.workpiece dimension: 70mm Work table dimension: 320mm*530mm Frame materials: aluminum alloy 6063 and 6061 Leadscrew: 1404 double thread Trapezoidal screws Driving units: X axis 1404 trapezoidal screws Y axis 1404 trapezoidal screws Z axis 1404 trapezoidal screws Sliding units:X axis Dia.16mm chrome plate shafts Y axis Dia.16mm chrome plate shafts Z axis Dia.12mm chrome plate shafts Stepping motor type: 57 two-phase 1.8A Spindle motor:400w dc motor 500~8000PRM/Min Principal axis collet: ER11 / 3.175 mm Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03 mm Control unit:triaxial one-piece drive + ring variable power + PWM speed Carving Instructions: G-code/.tab /.nc / .ncc/.txt Communication interface: USB Software environment: win 7/xp Maximum speed: 0-4000mm/min Carving speed: 300-2500mm/min (different materials differ) Machine weight:28KG Instalation tips: The software perferm better on the 32bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.(This is very important) Otherwise, the antivirus will regards the cnc software is virus and stop the installation. PS: Please don't update the software when installed, then it will not need the license Numbers. Control box parameters: Operating Voltage:AC220V Control unit:2.5A stepping motor driver plus adjustable spindle speed controller Computer connection:USB port AND PARALLEL PORT Command code:G code Acceptable software:EMC2 Protection:Emergency stop button Feature 1 year machine part Free warranty Simple operation and installation More steady and strong equiped with aluminum alloy frame materials Can be controlled by computer Can control the engraving more precise Emergency stop button enhance security Large 3D engraving in soft wood,MDF board,native wood,PVC,Acrylic we suggest use one or two spiral flute ball bits. Can engraving much more materails by spiral flute bits,such as metal,steel,MDF board solid wood,composite board plywood,stone. Spindle motor knob is useful for small positioning adjustment ,with steady and strong support structure MODEL EIGHT:CNC 3020 4 Achse 300W PARALLEL PORT SKU:LL3020-A+LL3020T1 Attention: This machine needs to connect to a computer through its controller box with a parrallel cable (both included). It is not recommended to connect to a notebook through a parrallel port as the power saving features tend to interrupt the data flow. It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the Parrallel port driver. Introduction CNC 3020 is suitble for Industry,Technology Research,Advertising Design,Arts Creation,Teaching,Student Project and Hobby Purposes. CNC 3020 is a desktop CNC machine and designd for processing Industrial or Hobby Prototype Building, Building Model Making,PCB,Adverstising Signs,Artwork,Crafts,Aircraft Models,RC Model parts,etc.So,you can do engraving work at office or home. Exquisite 3020 is a miniature version of mobile longmen structure of carving machine,put on you computer is like puting a printer or scanner that coordination,and can completely as a compute peripherals tools,anywhere,anytime,help you to design intent fast real appear.Nonmetal materials on the milling,and it can also be used to carving simple PCB/CNC. More Precise Stepping Motor The engraving process is visible as controlled by computer Simple operation and installation. Engrave almost anything on almost any surface. X、Y、Z axis carving make more precise and and three-dimensional effect Cover plates reducing pollution for the screws and shafts. More steady and strong equiped with aluminum alloy frame materials Reinforced and thickened machine body make transportation absolutely to be safer and longerlife time. Application This 3020 engraer is a user-friendly desktop engraving machine for those with limited space and /or a limited budget. The Computerized CNC Engraving and Cutting Machine is suitable for various materials, such as WOOD, PMMA or other plastic,MDF board,native wood,PVC,Acrylic, wood,composite board plywood,It can be used widely to process or make adverstising signs,PCB,nameplates,badges,seals,bronzing plate,aluminium alloy,acryplates,ABS resin double color plate,PVC foaming board,indentation plates,signs,construction models,instrument panels,wooden products,etc. Technical Parameters 3020T triaxial engraving machine part parameters: Effective working travel:200(X)mm*300(Y)mm*45(Z)mm Shape dimension:306x255*106mm Max.workpiece dimension:200mm*300mm

  • Condition: Neu
  • POWER: 1500W
  • Connection Port: USB PORT
  • Model: CNC 6040 4 Achse USB
  • Destination never sent to or arrived: Canarias Island
  • Features: ❤❤❤Great value withwarranty❤❤❤
  • Material 1: Hohe Qualität,Stabile Eigenschaft
  • Merkmal 1: Kreatives Design, langlebiges Material, schönes Aussehen
  • Herstellergarantie: 3 Jahre
  • Marke: Markenlos
  • Produktart: Fräsmaschine
  • Steuerungsart: Wie Beschreibung zeigen
  • Funktion: Fräsen
  • Spannung: 220 V

PicClick Insights - 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver PicClick Exklusiv

  • Popularität - 3 Beobachter, 0.6 neue Beobachter pro Tag, 5 days for sale on eBay. Hohe beobachtend. 0 verkauft, 10 verfügbar.
  • Popularität - 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

    3 Beobachter, 0.6 neue Beobachter pro Tag, 5 days for sale on eBay. Hohe beobachtend. 0 verkauft, 10 verfügbar.

  • Bestpreis -
  • Preis - 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

  • Verkäufer - 913+ artikel verkauft. 1.1% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.
  • Verkäufer - 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

    913+ artikel verkauft. 1.1% negativ bewertungen. Großer Verkäufer mit sehr gutem positivem Rückgespräch und über 50 Bewertungen.

    Aktuelle Bewertungen
  • 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

    EUR 365,42 Sofort-Kaufen 17d 15h

  • 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

    EUR 365,93 Sofort-Kaufen 19d 21h

  • 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

    EUR 359,90 Sofort-Kaufen 19d 18h

  • 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

    EUR 365,93 Sofort-Kaufen 10d 21h

  • 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

    EUR 365,93 Sofort-Kaufen 27d 19h

  • 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

    EUR 365,93 Sofort-Kaufen 11d 21h

  • 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

    EUR 498,82 Sofort-Kaufen 25d 15h

  • 3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver

    EUR 503,77 Sofort-Kaufen 12d 19h

  • VEVOR CNC-Fräsmaschine Graviermaschine 300W 3 Achsen GRBL-Steuerung Holzgravur

    EUR 316,53 Sofort-Kaufen 21d 16h

  • LUNYEE CNC Fräsmaschine 3018 PRO MAX CNC Router Graviermaschine Offline Control

    EUR 320,11 Sofort-Kaufen 14d 22h

  • VEVOR CNC-Fräsmaschine Graviermaschine 120W 3-Achsen-GRBL-Steuerung Holzgravur

    EUR 261,79 Sofort-Kaufen 21d 16h

  • SainSmart Genmitsu CNC Fräsmaschine 3018-PROVer niedrige Stunden.

    EUR 100,00 0 Gebote oder Sofort-Kaufen 4d 0h

  • Modellbau CNC Fräse

    EUR 101,00 2 Gebote 3d 5h

  • 3 Achsen Fräsmaschine Fräse Lasergravur Maschin Cutter CNC Laser Graviermaschine

    EUR 132,21 Sofort-Kaufen 19d 19h

  • Lasergravierer, 20W Laser Graviermaschine Mini laser cutter 420 * 400 mm

    EUR 159,00 Sofort-Kaufen 28d 22h

  • CNC 6040 0.8KW 3 Achsen CNC 0.8KW für Bastler

    EUR 400,00 Sofort-Kaufen 15d 3h

  • VEVOR CNC Fräsmaschine 3018 Pro Max Graviermaschine GRBL Offline Control 500mW

    EUR 177,30 Sofort-Kaufen 5d 21h

  • 【DE】LUNYEE 3 Achsen GRBL CNC 3018 Pro Ultra Engraver CNC Fräsmaschine Gravur kit

    EUR 415,31 Sofort-Kaufen 14d 23h

  • CNC 6040/3040/3020 3/4 Achse Router Fräsmaschine Metall Fräsmaschine Fräsen

    EUR 469,98 Sofort-Kaufen 8d 14h

  • 3 Achsen Fräsmaschine Fräse Lasergravur Maschin Cutter CNC Laser Graviermaschine

    EUR 132,21 Sofort-Kaufen 11d 19h

  • 「DE」3018-PRO CNC Router Engraver Laser Machine Milling Cutting Wood PVC plastic

    EUR 172,55 Sofort-Kaufen 17d 20h

  • CNC 3018 PRO Fräsmaschine metall Router Engraver Cutter Graviermaschine DE

    EUR 177,27 Sofort-Kaufen 26d 18h

  • SCULPFUN S9 Laser Graviermaschine 90W Effekt Laser Engraver Ganzmetall 410*420mm

    EUR 279,00 Sofort-Kaufen 15d 6h

  • Twotrees TTC 450 3-Achsen-CNC-Fräsmaschine, neu mit Zubehör

    EUR 285,00 0 Gebote 6h 47m

  • CNC Fräsmaschine 3018 Pro Max Graviermaschine GRBL+Offline Control 5500mW

    EUR 216,57 Sofort-Kaufen 5d 22h

  • 3 Achsen Fräsmaschine Fräse Lasergravur Maschin Cutter CNC Laser Graviermaschine

    EUR 131,83 Sofort-Kaufen 15d 15h

  • CNC Desktop DIY Laser Schneiden Cutter Holz Plastik Schaum Graviergerät Gravur

    EUR 157,86 Sofort-Kaufen 16d 18h

  • Laser-Graviermaschine NEJE 1.000mW

    EUR 22,50 3 Gebote 5d 7h

  • CNC 4540 Router Engraver Milling Machine for Metal 20W 40W Laser + 500W Spindle

    EUR 511,70 Sofort-Kaufen 5d 20h

  • 60W/130W/160W Laser Gravur Maschine Laser Cutter Graviermaschine Lasergravier

    EUR 299,00 Sofort-Kaufen 7d 0h

3/4 Achse CNC 6040 Graviermaschine Router Fräsmaschine Graviergerät DIY Engraver • EUR 1.247,63 (2025)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Barbera Armstrong

Last Updated:

Views: 6245

Rating: 4.9 / 5 (59 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Barbera Armstrong

Birthday: 1992-09-12

Address: Suite 993 99852 Daugherty Causeway, Ritchiehaven, VT 49630

Phone: +5026838435397

Job: National Engineer

Hobby: Listening to music, Board games, Photography, Ice skating, LARPing, Kite flying, Rugby

Introduction: My name is Barbera Armstrong, I am a lovely, delightful, cooperative, funny, enchanting, vivacious, tender person who loves writing and wants to share my knowledge and understanding with you.